» » » 1200W power amplifier with sanken

1200W power amplifier with sanken

This 1200W power amplifier with sanken using a booster 8 sets sanken , the buffer using transistor D400 and B560 as much 2 sets , and to use part of the driver transistor B546/A940 and D401/C2168. 1200W power amplifier with sanken have least 20 volts and the voltage to 70 volts maximum with three voltage is +,-,ground. 1200W power amplifier with sanken Power Output 2 X 600 Watt with 8 Ohm Impedance.
Circuit audio amplifier 600 Watt

Circuit of PCB so from 2  X 600 watts (looked down)

Circuit of PCB (looked upon)

The above is a circuit of ready to operate , just stay put booster.
See also high power amplifier : 2800W High Power Amplifier

Related Posts :

7 Responses to "1200W power amplifier with sanken"

  1. ElectroschematicsMarch 6, 2011 at 12:23 AM

    the booster circuit use sanken , sanken was nice indeed.

    ReplyDelete
  2. sugengMarch 7, 2011 at 12:04 AM

    thx for your scheme

    ReplyDelete
  3. KotagMarch 7, 2011 at 1:33 AM

    ok , sir,

    ReplyDelete
  4. ellbex besavillaJune 11, 2011 at 4:52 AM

    this circuit is so great..

    ReplyDelete
  5. Neroz KunJune 11, 2011 at 5:26 AM

    this circuit is so powerful and cheaper than other circuits

    ReplyDelete
  6. KotagJune 22, 2011 at 7:55 PM

    it's really interesting to be trying..

    ReplyDelete
  7. AnonymousOctober 9, 2011 at 8:08 PM

    is there any ckt diagram for this???

    ReplyDelete

Subscribe to: Post Comments (Atom)